Home » Aerial Electrical Fittings » Dead End Clamp
Dead End Clamp Aluminium Dead End Clamp NES, NXJ Series
THKO,THKP Anchoring ClampTHKP Anchoring Clamp

THKP Anchoring Clamps

THKP anchoring clamps are suitable for anchor fastening for branch, insulated wire of identical section.
They are used for suspension of branch wires or wires of street illumination.

Constructions of THKP Clamp:
1. Reinforced polyamide with fiber glass body;
2. Two clamping steel plates with steel bolts;
3. Springs, provides automatic opening of clamp for installation and fastening of wires.

Parameters of THKP Anchoring clamps
Identification Wire section (mm2) Minimum breaking load (KN) Tightening Torque (Nm)
THKP2 2×16; 2×35 5 22
THKP4 4×16; 4×35 10 22
Related products
    2. Dead End Clamp

      It can use CS-10 aluminum alloy pole mounted bracket for fixing.
      It can also be bolted to the pole with M14&M16 bolt; or two stainless steal straps 20mm×0.7 ...

    2. Aluminium Dead End Clamp

      The aluminium dead end clamp is suitable for insulated neutral connection.
      It can use CS-10 aluminum alloy pole mounted bracket for fixing.
      It also can be bolted to the pole with M14&M16 bolt or two stainless steal straps ...