Home » Aerial Electrical Fittings » Dead End Clamp
Dead End Clamp Aluminium Dead End Clamp NES, NXJ SeriesTHKO,THKP Anchoring Clamp

THKO Anchoring Clamp

THKO anchoring clamps are suitable for anchor fastenings for self-supporting insulated conductor with four bearing wires of identical section.
Constructions of THKO Clamps:
1. Reinforced polyamide with fiber glass body;
2. Two clamping steel plates with steel bolts;
3. Springs, provides automatic opening of clamp for installation and fastening of wires.
Parameters of THKO Anchoring clamp

Identification Wire section (mm2) Minimum breaking load (KN) Tightening Torque (Nm)
THKO1 4×(25-50) 25 44
THKO2 4×(70-120) 40 44

THKP Anchoring Clamps

THKP anchoring clamps are suitable for anchor fastening for branch, insulated wire of identical section.
They are used for suspension of branch wires or wires of street illumination.
Constructions of THKP Clamp:
1. Reinforced polyamide with fiber glass body;
2. Two clamping steel plates with steel bolts;
3. Springs, provides automatic opening of clamp for installation and fastening of wires.
Parameters of THKP Anchoring clamps

Identification Wire section (mm2) Minimum breaking load (KN) Tightening Torque (Nm)
THKP2 2×16; 2×35 5 22
THKP4 4×16; 4×35 10 22
Related products
Dead End Clamp
Aluminium Dead End Clamp
Four Core Collecting Dead End Clamp
NES Series Four Core Collecting Dead End Clamp (Anchor Clamp)