Home » Aerial Electrical Fittings » Dead End Clamp
    2. Dead End Clamp

      It can use CS-10 aluminum alloy pole mounted bracket for fixing.
      It can also be bolted to the pole with M14&M16 bolt; or two stainless steal straps 20mm×0.7 ...

    2. Aluminium Dead End Clamp

      The aluminium dead end clamp is suitable for insulated neutral connection.
      It can use CS-10 aluminum alloy pole mounted bracket for fixing.
      It also can be bolted to the pole with M14&M16 bolt or two stainless steal straps ...

    2. Four Core Collecting Dead End Clamp

      This kind of dead end clamp is applicable in self supporting 4 core aerial cable. Used with M16 Eyebolts ...

    2. NES Series Four Core Collecting Dead End Clamp (Anchor Clamp)

      The dead end clamp is applicable for the end of aerial insulation lines up to 1kV.
      It is used to tighten up the insulation conductor ...

    2. NXJ Wedge Type Overtension-resistant Clamp

      NXL series wedge type aluminum alloy overtension-resistant clamp is applicable for:
      overtension-resistant insulator bunch of the two terminals of ...

    2. THKO Anchoring Clampp

      THKO anchoring clamps are suitable for anchor fastenings for self-supporting insulated conductor with four bearing wires of identical section.

    2. THKP Anchoring Clampp

      THKP anchoring clamps are suitable for anchor fastening for branch, insulated wire of identical section. They are used for suspension of branch wires or wires of street illumination.